Can a flat panel detector be placed on the bucky stand - Newheek x ray bucky stand professional manufacturer - Newheek x ray bucky stand professional manufacturer
HomeBlog›Can a flat panel detector be placed on the bucky stand

Can a flat panel detector be placed on the bucky stand

The customer asked whether our bucky stand can hold flat panel detectors? After understanding, the customer already has a 14×17 flat panel detector and plans to purchase a bucky stand for supporting use. Our bucky stand has many styles. After sending the product information to the customer, the customer chose our DR dedicated mobile bucky stand.
This bucky stand film box can move up and down with a maximum stroke of 1100mm; the width of the card slot is suitable for boards with a thickness of <20mm; the left-to-right deviation between the center of the DR flat panel detector and the center of the film box as well as up and down is not more than ±5mm; within the range of travel, the center of the film box The left-right deviation is not more than ±5mm; The size of the DR flat panel detector, CR IP board, and cassette: The size of the DR flat panel detector, CR IP board, and cassette: 5 “×7 “-17 “×17” The clip can be up and down The maximum size that can be accommodated is 495mm, and the left and right widths are unlimited.

bucky stand


(+86) 18953679166
service@newheek.com