How to install and use the mobile bucky stand? - Newheek x ray bucky stand professional manufacturer
HomeBlog›How to install and use the mobile bucky stand?

How to install and use the mobile bucky stand?

How to install and use the mobile bucky stand? Let me introduce to you:
(1) After laying the column flat, align the four screw holes of the base with the four φ8.5 through holes at the bottom of the column, and tighten them with four M8 screws. At the same time, the labels on the column and the bottom of the base two arrows facing each other
(2) Slowly stand up the device and place it on a flat and hard surface 180cm away from the tube, so that the vertical center of the film box coincides with the center of the tube to maintain the best clarity of the film;
After adjusting the position, lock the front two brake wheels, and you can take pictures at this time.
(4) Brake wheel operation method:
When the bucky stand switch is pressed, the brake wheel is open and the wheel is in a free state; at this time, the mobile base can be adjusted to the desired position;
If you are interested in our mobile bucky stand, welcome to contact us, call (whatsapp): +8617616362243!

X-ray bucky stand


(+86) 18953613955
service@newheek.com