Notes and Storage Conditions of Electric X-ray Bucky Stand - Newheek x ray bucky stand professional manufacturer
HomeBlog›Notes and Storage Conditions of Electric X-ray Bucky Stand

Notes and Storage Conditions of Electric X-ray Bucky Stand

Cautions for electric X-ray Bucky Stand:

  1. Make every effort to keep the coincidence degree between the vertical center of the film box and the X-ray tube when installing, otherwise the phenomenon of light and dark will appear on one side.
  2. Ensure that the convergence distance is about 180 cm to maintain the clarity of the film.
  3. Pay attention to the selection of photographic conditions (KV, mA).
  4. In order to ensure the transport safety of the camera rack, the camera is usually fixed with a screw at the bottom of the column. When using, the fixed screw must be removed to ensure the normal use of the camera.

Transportation and storage conditions of electric X-ray Bucky Stand:

Under the condition of transportation or storage and packaging, the equipment must be able to be placed for more than 15 weeks in the environment not exceeding the following range.

The temperature ranges from – 40 C to 55 C.

Humidity is less than 90%;

Atmospheric pressure ranges from 500 kPa to 1060 kpa.

Storage in non-corrosive gas and well ventilated room.


(+86) 18953679166
service@newheek.com