Simple bucky stand with mobile base - Newheek x ray bucky stand professional manufacturer
HomeBlog›Simple bucky stand with mobile base

Simple bucky stand with mobile base

A customer asked about the vertical bucky stand, and asked what the customer wants. He replied that he only needs the simplest structure of the bucky stand, so we recommended a simple bucky stand with a mobile base to the customer.
The simple bucky stand is mainly composed of a bracket, a slide rail and a film box.
The main technical parameters of simple bucky stand:
1. The maximum stroke of the film box moving up and down is 1100mm;
2. The groove width is suitable for plates with a thickness of ≤35mm;
3. The left, right, up and down deviation between the center of the DR plate detector and the center of the plate box should not be greater than ±5mm
4. Within the range of travel, the left and right deviation of the box center should not be greater than ±5mm
5. DR flat panel detector, CR IP board, cassette size:
The size of DR flat panel detector, CR IP board and cassette is 5″×7″ -17″×17″
The upper and lower clamps can hold up to 495mm, and the left and right widths are not limited.

simple bucky stand


(+86) 18953679166
service@newheek.com