Do you know how the rear-mounted bucky stand is implemented?
Do you know how the rear-mounted bucky stand is implemented?
Bucky stand includes column, rotating frame, bucky, panel, fixed filter board, typeface tape, Velcro, coil spring, pull wire, top clip, lower clip , the cassette, the upper clip is located at the top of the bucky, the lower clip is located at the lower part of the bucky, the fixed filter board between the upper and lower clips and the panel, and the velcro on both sides of the bucky for bonding with the lead code fixed.
Characterized in that: bucky is located on the side of the column, supported by the rotating frame, one end of the rotating frame is snapped into the sliding slot on one side of the column, and the camera box slides up and down in the sliding slot through the rotating frame, and slides up and down along the vertical direction of the column.
And the bucky is turned in the transverse direction of the column to be 0-180 degrees in the vertical direction of the column, the cassette is directly inserted from the back of the bucky, and is caught between the upper and lower clips, and the upper clip has two coil springs. There are pull wires on both sides of the cassette, the top ends of the pull wires are respectively connected with the coil spring, and the lower end is connected with the lower clip.