What are the manufacturers of bucky stands?

Let me introduce the bucky stand produced by Weifang Newheek Electronic Technology Co.,Ltd. Place the stand on a flat hard ground 180cm away from the ball tube, make the vertical center of the filming box coincide with the center of the ball tube, after the adjustment is correct, align it with the centers of the four φ8. Drill holes with an electric hammer and install four M8 expansion screws, and then tighten them; after the adjustment is correct, you can shoot at this time.
Use of bucky stand:
(1) Hold the handle of the film trolley, pull out the film trolley inside the film box, snap the selected film box (or IP board, DR detector) into the mobile film holder, push down the mobile film holder, so that the film box ( or IP board, DR detector) placed in the upper and lower clips, and clamped;
(2) Push the film cart into the box body and clamp it tightly;
(3) Loosen the locking handle, press the filming position, adjust the height of the trolley frame, and reach the appropriate height of the filming box. After the adjustment, lock the handle and start filming.
(4) After the filming is completed, pull out the film cart, take out the film box (or IP board, DR detector) from the film holder; and push the film cart into the film box.
If you have a purchase demand for the bucky stand, please call us. Whatsapp:+86 18953679166. Email: service@newheek.com.