DR dedicated vertical bucky stand

Recently, a customer has inquired about whether there is a vertical bucky stand for DR flat panel detectors. The customer mainly uses 14*17 flat panel detectors, which need to be matched with a supported vertical camera stand, Weifang Huading Electronics The dr vertical dedicated vertical bucky stand can fully meet the requirements.
Vertical bucky stand-DR dedicated
1. Model: NKDRSG (chest frame, DR chest frame, photo frame, DR vertical chest frame)
2. Purpose: suitable for radiographic inspection of the human body’s head, chest, abdomen, pelvis and other parts
3. Function: This device is composed of a column, a sliding frame, a film box and a balance device, which can be adapted to various sizes of DR flat panel detectors, CR IP boards and ordinary film cassettes.
4. Main technical parameters ①The maximum stroke of the film box moving up and down is 1100mm; ②The card slot width is suitable for the board with a thickness of ≤35mm; ③The left and right deviation between the center of the DR flat panel detector and the center of the film box and the upper and lower deviations are not more than ±5mm. The left and right deviation of the box center is not more than ±5mm ⑤The size of the DR flat panel detector, CRIP board, and the cassette: The size of the DR flat panel detector, CRIP board, and cassette: 5 “×7 “-17 “×17 “The clip can accommodate up and down The maximum size is 495mm, and the left and right widths are unlimited.
5. It can be equipped with a mobile base to become a mobile bucky stand (NKDRSY type).