Installation of an electric Bucky Stand.

The electric Bucky Stand is mainly composed of a column assembly, a camera box assembly, an electric device and the like, and is adapted to different sizes of wireless DR board detectors, CR IP boards and cassettes.

Place the electric chest piece on a flat hard surface 180 cm away from the X-ray tube, so that the vertical center of the cassette coincides with the center of the X-ray tube. After the adjustment is correct, align the four φ8.5 passes at the bottom of the column. In the center of the hole, install four M8 expansion screws with a hammer and then tighten. Press the remote control switch to adjust the camera unit to the appropriate height, and then you can use the X-ray machine to shoot.

If you are interested in our electric Bucky Stand, please feel free to contact us.