What is the fixed frame of 17 “X17”?

The bucky stand of 17 “X17” wants to be cheaper than the movable frame. Many customers think that the installation of the fixed frame is troublesome. In fact, the installation of the fixed frame of 17 “X17” is very simple. It only needs to place the device on the flat hard ground 180 cm away from the tube to make the vertical center of the box coincide with the center of the tube. After the adjustment is correct, four M 8 expansion screws are installed in the through hole centers of the four_8.5 at the bottom of the column of the alignment device, and then tightened.
fixed frame of 17 “X17” size is 17 “X17”, can be placed 17 “X17” IP board, flat panel detector and dark box.