4 sets of bucky stand are ready to be sent to Guyana - Newheek x ray bucky stand professional manufacturer
HomeBlog›4 sets of bucky stand are ready to be sent to Guyana

4 sets of bucky stand are ready to be sent to Guyana

4 sets of bucky stand are ready to be sent to Guyana. Simply introduce the electric bucky stand.

Bucky radiology operation
1. Installation
Place the electric bucky stand device on the flat hard ground 180cm from the finished tube, so that the vertical center of the camera box coincides with the center of the tube. After correct adjustment, align the four φ8.5 passes at the bottom of the device column. In the center of the hole, install four M8 expansion screws with a hammer and then tighten.

Guide you to choose a suitable medical x ray bucky stand
2. Use
(1) Open the cassette door, insert the selected cassette into the clip, push down, place the cassette in the card, then release the cassette, and the cassette will be automatically clamped;
(2) close the box door;
(3) Adjust the appropriate height of the cassette according to the shooting conditions to select the shooting conditions.


(+86) 18953679166
service@newheek.com