Installation of a fixed Bucky Stand.
When the fixed Bucky Stand is installed, it should be placed on the flat hard ground 180cm away from the X-ray tube, so that the vertical center of the Bucky Tray coincides with the center of the X-ray tube. After the adjustment is correct, align the four φ8 at the bottom of the column. At the center of the through hole of the 5, install four M8 expansion screws with a hammer and then tighten.
At the time of delivery, we usually choose the whole set of delivery, so that the customer can directly use the product after receiving the goods. The customer only needs to fix the fixed Bucky Stand to the ground with the expansion screw.
If you are interested in our fixed Bucky Stand, please feel free to contact us.