Precautions for Bucky Stand installation.

The Bucky Stand is an important inspection tool for the hospital radiology department. Natural installation is also very important. Let’s talk about what you need to pay attention to during the installation process.

The Bucky Stand needs to be placed on a flat hard surface 180 cm away from the X-ray tube, so that the vertical center of the Bucky Tray coincides with the center of the X-ray tube. After correct adjustment, align the center of the four φ8.5 through holes at the bottom of the column. Install four M8 expansion screws with a hammer and then tighten.

If you are interested in our Bucky Stand, please feel free to contact us.