Some customers consult our wall-mounted bucky stand - Newheek x ray bucky stand professional manufacturer
HomeBlog›Some customers consult our wall-mounted bucky stand

Some customers consult our wall-mounted bucky stand

Recently, some customers consulted our wall-mounted bucky stand. The design of this bucky stand is relatively simple, mainly composed of a slide frame and a film clip, and it can be used by hitting a few expansion screws on the wall. The height can be adjusted according to your actual needs. Its main parameters are:
Uses: It is suitable for photographic examination of the head, chest, abdomen, pelvis and other parts of the human body;
Structure: The device is composed of uprights, slides and film clips, and is suitable for different sizes of cassettes.
Through the film, CR IP board and flat panel detector with (without) line;
The main technical parameters
1. The total height of the bucky stand is 1500mm (1800mm can be customized);
2.The width of the film frame is 455mm;
3.The minimum travel of the photo box is 1000mm;
4. Recommended installation height: ≥500mm from the ground
5.Card slot width ≤35mm (compatible with most DR flat panel detectors, CR IP boards, ordinary cassettes);
6. Maximum film size: unlimited (adjustable clip spacing);
7. Installation method: hanging on the wall (recommended distance 500mm from the ground);
8.Suitable size of film clip: 5″×7″—17″×17″ or larger.
Introduction to wall mounted bucky stand


(+86) 18953679166
service@newheek.com