What should be paid attention to during the use of chest X-ray stand? - Newheek x ray bucky stand professional manufacturer
HomeBlog›What should be paid attention to during the use of chest X-ray stand?

What should be paid attention to during the use of chest X-ray stand?

What is a Chest X-ray Stand? The chest stand is a film-taking auxiliary device that is matched with a medical X-ray machine and can move up and down, a kind of film-taking device that moves up and down. Used together with various X-ray machines, it can perform X-ray examinations of various parts of the human body such as the chest, head, abdomen, and pelvis.
What should be paid attention to during the use of the chest X-ray stand?
When installing, the device needs to be placed on a flat and hard ground 180cm away from the ball tube, so that the vertical center of the camera box coincides with the center of the ball tube. After correct adjustment, align with the center of the four φ8. , Drill holes with an electric hammer to install four M8 expansion screws, and then tighten them; after the adjustment is correct, you can shoot at this time. Note: When installing, try to keep the coincidence between the vertical center of the film box and the ball tube, otherwise there will be a phenomenon that one side is bright and the other is dark; ensure that the convergence distance is about 180cm to maintain the clarity of the film.
When using it, do:
1 .Hold the handle of the film trolley, pull out the film trolley inside the film box, insert the selected film box (or IP board, DR detector) into the mobile film holder, push down the mobile film holder, and make the film box (or IP board) board, DR detector) placed in the upper and lower clips, and clamped.
2 .Push the film cart into the box body and lock it tightly.
3. Loosen the locking handle, press the filming position, adjust the height of the trolley frame, and reach the appropriate height of the filming box, after the adjustment, lock the handle, and the filming can be done.
4. After the filming is completed, pull out the film cart, take out the film box (or IP board, DR detector) from the film holder; and push the film cart into the film box.
Note: When taking out the film box (or IP board, DR detector), make the moving film holder fall back slowly to prevent the film holder and slider from being damaged by too strong force.
Weifang Newheek Electronic Technology Co.,Ltd. is an import and export trading company that produces X-ray machines and chest stands. We produce a complete range of chest stands. Welcome to consult.Whatsapp(Tel):+86 18953679166. Email: service@newheek.com


(+86) 18953679166
service@newheek.com