Bucky stand overview - Newheek x ray bucky stand professional manufacturer - Newheek x ray bucky stand professional manufacturer
HomeBlog›Bucky stand overview

Bucky stand overview

The Bucky stand uses the combination of the medical X-ray machine and the device in the medical institution to perform film inspection on the head, chest, abdomen, pelvic and other parts of the human body to achieve the purpose of diagnosing the lesion. The generic name for this product is the camera holder, the name is the vertical bucky stand.
      Technical Parameters
(1) The maximum stroke of the camera box is 1100mm;
(2) Maximum film size: 356mm × 432mm (14〞 × 17〞);
Enquiry for bucky stand Bucky stand category introduction

1. Installation
Place the device on a flat, hard surface 180 cm from the tube to center the camera and the ball
After the tube centers are coincident and adjusted correctly, align the center of the four φ8.5 through holes at the bottom of the column of the device, and install four M8 expansion screws with electric hammer holes, and then tighten them.
2. Use
(1) Open the cassette door, insert the selected cassette into the clip, push down, place the cassette in the card, and then release the cassette, the cassette automatically snaps up;
(2) close the box door;
(3) Adjust the appropriate height of the cassette according to the camera position to select the camera condition.
If you want to know more about Newheek bucky stand, please contact our customer service.


(+86) 18953679166
service@newheek.com