Newheek vertical bucky stand

The Bucky stand uses the combination of the medical X-ray machine and the device in the medical institution to perform film inspection on the head, chest, abdomen, pelvic and other parts of the human body to achieve the purpose of diagnosing the lesion. The common name for this product is the camera holder, and its trade name is the vertical camera holder.
 

    Technical Parameters
(1) The maximum stroke of the camera box is 1100mm;
(2) Maximum film size: 356mm × 432mm (14〞 × 17〞);
     1. Installation
Place the device on a flat, hard surface 180 cm from the tube to center the camera and the ball
After the tube centers are coincident and adjusted correctly, align the center of the four φ8.5 through holes at the bottom of the column of the device, and install four M8 expansion screws with electric hammer holes, and then tighten them.
2. Use
(1) Open the cassette door, insert the selected cassette into the clip, push down, place the cassette in the card, and then release the cassette, the cassette automatically snaps up;
(2) close the box door;
(3) Adjust the appropriate height of the cassette according to the camera position to select the camera condition.

If you want to know more about Newheek bucky stand, please contact our customer service.